Telnet Page ‘H’ (Call Status Page)

Telnet Page 'h' displays the status of Current Calls for the router. In addition the user can initiate calls using this page with the commands defined here. The display is updated every second.

Example of a Telnet Page g display

        Router Status page h (0010101504)


Call Status display
Endpoint no.=0 status=OK
Endpoint no.=1 status=OK

Call Test Commands

To enable the test feature type 't' and the prompt 'Enter command:' will be displayed. The following commands are available:

Command	Function	Parameters
MY Number ZX	Make Call	Where: M = Make Call Y = optional channel default is don't care, 1 = B1 2 = B2 Number = string to be dialed may be number or *xx format Z = Type May be V = Voice or D = Data X = optional bearer may be S=Speech, 3 = 3.1 Khz audio, 6 = 64K clear 5 = 56K
TE Number	Transfer Call	Where: T = Transfer Call E = endpoint that has call Number = string to be dialed may be number or *xx format
CE Number	Conference Call	Where: C = Conference Call E = endpoint that has call to be conferenced Number = string to be dialed may be number or *xx format
HE	Hold Call	Where: H = Hold Call E = endpoint above which has call
UE	UnHold Call	Where: U = UNHold Call E = endpoint above which has held call
DE	Drop Call	Where: D = Drop Call from conference E = endpoint above which has conference
BE	Disconnect (Break) Call	Where: B = Disconnect (Break) Call E = endpoint above which has call
AE	Abort Call	Where: A = Abort Call E = endpoint above which has made call

support home
contents
arp table
routing table
i/o stats
hotpools
ip stats
link states
system log
cpu stats
link log
traffic log
policy q's
security
isdn log
nat
multicast
dhcp
isdn test

If you are happy it's OK - but your browser is giving a less than optimal experience on our site. You could, at no charge, upgrade to a W3C STANDARDS COMPLIANT browser such as Mozilla

Telnet Page ‘H’ (Call Status Page)

Call Test Commands

Contents

Products