mail us  |  mail this page

products  |  company  |  support  |  training  |  contact us

WarpTwo Router - MultiCast

IP Multicast Features

User control over supported multicast routes.

Multicasting features are defined at the 'Logical Route' level and are therefore destination sensitive not connection sensitive.

go up

IGMPv2 support.

WarpTwo supports standard IGMPv2 services (defined in RFC 2236) but may be optionally configured to use IGMPv1 services.

go up

User control over IGMPv1 & IGMPv2 support.

The user may enable IGMPv1 support using the ZyTrax Enterprise SNMP MIB. The default is to use IGMPv2 services.

go up

User control over ‘membership query’ intervals.

The use may control the frequency of IGMP membership queries via the ZyTrax Enterprise SNMP MIB allowing optimization of LAN use.

go up

Filtering of Housekeeping and User Multicast traffic (Housekeeping Multicasts will not keep Link open).

IGMPv1 or IGMPv2 messages are categorized as 'Housekeeping' and as such are NOT used in any calculations to keep links open or to add or remove capacity. Links will be dropped only if there no user data traffic flowing.

go up

features
general
bandwidth
dhcp
firewall
warp hardware
multicast
nat
isdn protocols
qos
routing
security
hotpools
management
utilities
dual-boot

If you are happy it's OK - but your browser is giving a less than optimal experience on our site. You could, at no charge, upgrade to a W3C STANDARDS COMPLIANT browser such as Mozilla

Services

Development Services
Consulting Services
Training Services
Tech Stuff Pages
Open Guides

Display full width page Full width page

Print this page Print this page

SPF Record Conformant Domain Logo

Copyright © 1994 - 2014 ZyTrax, Inc.
All rights reserved. Legal and Privacy
site by zytrax
Hosted by super.net.sg
web-master at zytrax
Page modified: July 11 2011.