All ZYTRAX router products now feature a Web interface for configuration and management. We will be progressively updating this feature.
Check the status of your software at a glance. A Readme.txt file is included with each release and contains Release Contents, Problems Cleared, Installation Instructions and Operational Instructions. Please read carefully the instructions below for downloading and installing your software. For your convenience the contebts of the readme.txt are displayed at the foot of this page.
NOTE: The Web interface supports all version 5+ browsers, specifically Microsoft Internet Explorer version 5.0+ and Netscape 6.1+ releases, and is platform independent. Older browsers should work but may not have all features enabled.
ZYTRAX WEB Configuration ======================== The ZYTRAX web configuration feature allow a user to use any standard browser to configure any of the MIB settings that control WarpTwo's operational cabilities. Due to the limited RAM available within the WarpTwo all the files used by the web configuration utility to format displays are stored externally on the users PC. Installation and Operation -------------------------- 1. Download the web10.zip file to a suitable location on local disk (recommended location is C:\zytrax\webfig) 2. Unpack the zip file into the selected directory 3. Load a suitable browser and select File menu->Open then navigate to the directory where downloaded files were unzipped and select the file index.html 4. This will display the ZYTRAX Web configuration start page 5. Enter the IP Address of the router and click the Connect button. 6. Follow the prompts on the displayed screens
Problems, comments, suggestions, corrections (including broken links) or something to add? Please take the time from a busy life to 'mail us' (at top of screen), the webmaster (below) or info-support at zytrax. You will have a warm inner glow for the rest of the day.